PLEASE READ THE ENTIRE DESCRIPTION BEFORE PURCHASING
BATCH 1 will be 10 units.
Lead time to receive product is 6-12 weeks.
Shipping is extra and will be charged to the buyer once order is approved.
Your Fully Assembled Remote Triggered 3D Printed Quick Release Hook Includes
3D Printed Quick Release Hook with:
Standard Size Servo
Mounting Hardware
3D Printed Battery and Electronics Holder with:
XT 60 Plug (Input 5v-35V)
Voltage Regulator
CRSF-PWM Converter, CRSF-PWM-6
TBS Crossfire Nano RX
Mounting Hardware
Not Included: Controller with Crossfire, Carabiner
How to configure controller (end of video): https://vimeo.com/firstclassdrones/qrassembly
More Information: https://www.firstclassdrones.ca/post/3d-printed-heavy-load-remote-controlled-quick-release-hook-for-drone
Test Video (50 Drops at 50LBS): https://vimeo.com/firstclassdrones/droptest
Commercial End-Use License
This allows you to:
* Use the printed hook for your own commercial operations.
* Print replacement parts for your own use.
* Modify the files for your own use.
* Print unlimited copies for your own use.
You may not:
* Sell, distribute, or share the STL/CAD files.
* Sell printed hooks.
* Manufacture the product for others.
* Redistribute or sublicense the design.
* Upload the files to any website.
* Use the design for commercial purposes.
* Claim the design as their own.
Disclaimer:
This product was tested by the manufacturer by repeatedly dropping a load of 50 lb (22.7 kg) for 50 cycles under controlled test conditions. These test results are provided for informational purposes only and do not guarantee performance.
3D printed parts can vary in strength depending on factors including, but not limited to:
· Printer calibration
· Print orientation
· Layer adhesion
· Material used
· Environmental conditions
· Wear, damage, and age
· Installation method
Before each use, inspect the product for cracks, deformation, loose fitment, or any signs of damage. Discontinue use immediately if any damage or wear is observed.
This product is provided for general purpose use only. It is not certified for safety-critical, life-support, climbing, lifting people, overhead lifting, fall protection, towing, or any application where failure could result in injury, death, or significant damage.
By using this product, you acknowledge that you are responsible for determining whether it is suitable for your intended application and that you assume all risks associated with its use.
The manufacturer and seller shall not be liable for any indirect, incidental, special, or consequential damages arising from the use or misuse of this product.
By using this product, you acknowledge that you have read and understood this notice.
