This product is 3D print files ONLY. This is NOT a physical product.
Files Included:
Controller Mount
Monitor Mounting Arm
A custom 3D printed monitor mount designed specifically for the DJI Inspire 3 RC Plus controller and optimized for the OSEE T5+ 5.5 inch monitor, while offering the flexibility to mount a variety of other monitors, screens, and compatible accessories.
The mount screws securely into the top and back mounting points of the RC Plus, creating a strong and stable connection while positioning the monitor directly above the controller’s built in screen. This creates a clean, compact dual screen setup, allowing operators to easily monitor both the camera feed and FPV pilot view at the same time. The controller will also still fit into the stock case when the screen is detached.
For a fast and convenient setup, the SMALLRIG Drop in HawkLock Mini Quick Release Clamp and Plate is a perfect pairing with our mount. The quick release clamp attaches securely to the mount, and the monitor bar snaps directly into the HawkLock system. Once in place, simply connect your 90 degree HDMI and USB cables and you’re ready to go. Note that the USB is powering the screen. You must have the brightness on the screen below 10 in order to avoid screen flickering. The quick release design also allows you to easily attach or remove the screen without having to unscrew or disassemble the setup each time.
Features
Designed specifically for the DJI Inspire 3 RC Plus
Optimized for the OSEE T5+ 5.5 inch monitor
Flexible design supports a variety of monitors, screens, and accessories
Secures to both the top and back mounting points of the RC Plus
Positions the monitor directly above the factory controller display
Pairs perfectly with the SMALLRIG Drop in HawkLock Mini Quick Release Clamp and Plate
Easy access for HDMI and USB connections
Quickly attach or remove the monitor for transport and setup
Ideal for simultaneous camera and FPV monitoring
Lightweight and low profile 3D printed design
Built for professional Inspire 3 operations
A practical, purpose built solution for Inspire 3 crews looking for a clean, secure and easily removable dual screen setup for professional operations.
Recommended PETG or stronger material for durability and flexibility
Hardware required:
M3 Screws 8mm x2
M3 Screws 6mm x1
For our OSEE T5+ setup
For SmallRig Quick Release - 1/4-20 8mm Screw
Brass Threaded Inserts - 1/4-20 6mm (Link)
OSEE T5+ mounting - 1/4-20 12mm (1/2 inch) Screw
NOTE: Add rubber between accessories and prints to provide extra grip
Commercial End-Use License
This allows you to:
* Use the device for your own commercial operations.
* Print replacement parts for your own use.
* Modify the files for your own use.
* Print unlimited copies for your own use.
You may not:
* Sell, distribute, or share the STL/CAD files.
* Sell printed parts.
* Manufacture the product for others.
* Redistribute or sublicense the design.
* Upload the files to any website.
* Use the design for commercial purposes.
* Claim the design as their own.
